Solectek skyway User Manual page 47

connections R
counters R
date RW
default W
distance RW
encrypt RW
ethcfg RW
exit W
freq RW Varies by region
ftppass RW
ftpuser RW
get R
gwaddr RW 192.168.1.1
help R
history R
ipaddr RW 192.168.1.100
Client Unit
192.168.1.200
Base Station
ipmask RW 255.255.255.0
clientstat show
all connected clients
show connections
show counters
date [-u]... [MMDDhhmmYYYY
Options:
-u Apply the UTC time zone offset
to the date
default
16 set distance [miles_or_kilometers] -
based on metric
show distance
open set encrypt [open | AES | radius]
show encrypt
auto set ethcfg [auto-neg | 10baseT-HD |
10baseT-FD | 100baseTx-HD |
100baseTx-FD]
show ethcfg
Exit
set freq [frequency]
show freq
p set ftppass [password]
show ftppass
ftp set ftpuser [user]
show ftpuser
Get
set gwaddr [a.b.c.d]
show gwaddr
help
history
set ipaddr [a.b.c.d]
show ipaddr
set ipmask [a.b.c.d]
show ipmask
- show the status of
Show active connections
Show RF statistics
Display or set current date
Restores system to factory defaults
Set distance in miles or kilometers
setting
Open: no authentication/encryption
AES: PSK authentication / AES
encryption
Radius: 802.1x authentication /
AES encryption
Set ethernet speed and duplex
Logout from Telnet session
Set RF frequency in MHz
Set remote ftp server password
Set remote ftp server username
Get commands
Set default gateway IP address
Show commands
Show command history
Set IP address
Set IP netmask
47