Diagnostics - Solectek skyway User Manual

23. Diagnostics

For access to diagnostic tools, navigate to Diagnostics => Time/Ping menu to view the following:
The ping tool can be used to isolate an issue to the wireless link only, not involving other network
elements such as switches and host computers. You can ping the remote unit from the unit you are
accessing via the user interface.
Destination Add: The IP address of the device to be pinged.
Packet Size: The size of the ping packets to be sent (in bytes).
Packet Count: The number of packets to be sent to the destination IP address.
Click on the Start button to initiate the ping session. Click Stop to terminate it.
You can also manage and view the status of ARP for both base station and client unit, as shown in
the screen below:
44