System Connection - Solectek skyway User Manual

3. System Connection

A. P D
ORT ESCRIPTIONS
SkyWay Access has the following access ports:
(1) 10/100/1000 Gigabit Ethernet + Power Connector (AS5800 Base station only)
•
OR (1) 10/100/ Fast Ethernet + Power Connector (all Client units)
(2) RF Ports: N type, female (AS5800 Base Station only – Client units come with
•
integrated antennas)
The RJ45 connector is accessed at the bottom of the unit, through a multi-piece waterproofing
feed-through. If included, the RF Ports are accessed on the bottom of the unit, which is shown
below.
B. C
ONNECTING THE
Use the diagram below as a guide to cable your SkyWay test system using a PC or Laptop and a
pair of Cat5 cables. An auto-MDIX feature eliminates the need for cross-over cables.
(AS5800, AS5810,
Unit Bottom View (Client Unit – AS5810, AS5830)
Unit Bottom View (Base Station – AS5800)
S W U
KY AY NIT
AS5830)
AND
6