Table of Contents
Advertisement
Plug the power adapter in the IP camera and connect the other end to the power
outlet.
Only use the power adapter supplied with the IP camera; otherwise, the product may
be damaged.
Step 4.
Plug Power on 100V ~ 240V
Ensure the power adaptor specification matches the power system (100 ~ 110V
AC or 220 ~ 240V AC) and connect the adaptor to the outlet.
Step 5.
Check LED status
The Power LED is defined to identify the IP camera status. When the IP camera is
booting, the LED will flash, and while the IP camera is ready, the LED will be
green.
Step 6.
Adjust lens focus
the IP camera lens.
2.4 Wall/Ceiling Mount Installation Procedure
Step1. Stick the given mounting label at the installation location.
Step2. Take the wall mount bracket, put it on the target place and fix it with the supplied screws
(total of 2).
Step3. Load the camera into the wall mount. Be sure the camera is mated with two fixed
screws, and rotate the camera clockwise to lock it in position.
Clockwise or counter-clockwise rotation can be adjusted for the focus of
7
Advertisement
Table of Contents
