2-way audio that enables audio communication between local and remote sites by connecting the external microphone and speaker. Moreover, the IP camera can be managed by PLANET Cam Viewer IP Surveillance management software for multi-camera video surveillance application and provides monitoring, recording and event management functions to secure your property and life.
Chapter 2. Physical Description and Installation 2.1 Package Contents l IP Camera Unit x 1 l Power Adapter x 1 l Quick Installation Guide x 1 l User’s Manual CD x 1 l Wall Mount Kit x 1 l Mounting Label x 1 l GPIO Connector x 1 2.2 Physical Details Front Panel...
Page 5
Bottom Panel GPIO Audio In Audio Out MicroSD Card Slot RJ-45 LAN 12V DC, 2A Interface Description The input power is 12V DC, 2A. ONLY use the power adapter that comes with the Power Jack package. Otherwise, the product may be damaged. Note Connect to PC or Hub/Switch. It connects to 10Base-T Ethernet or 100Base-TX Fast Ethernet cabling.
ICA-8200/ICA-8500, when this switch is a PoE device, you can ignore the next step. For ICA-8000 series, if there has an IEEE 802.3af PoE switch in your network, you can connect the IP camera’s LAN cable to this PoE switch to obtain power. The power adapter is unnecessary when the IP Note camera is powered by PoE switch.
Step 3. Attach the power supply Plug the power adapter in the IP camera and connect the other end to the power outlet. Only use the power adapter supplied with the IP camera; otherwise, the product may be damaged. Note Step 4.
Please insert the bundled CD disk into your CD/DVD-ROM drive. When the welcome web page appears, please click your IP camera name on the IP camera list, i.e. ICA-8000 series. Then click on the utility IPInstaller to start the program. 3.1 Network Configuration Please click the “Search Network Device”...
Page 9
3. Double-click the item to open the Property Page or click the menu bar Property. 4. After filling the desired settings in the properties, click on “Set” button to complete the configuration settings.
3.2 Opening the Web-based UI If IPInstaller finds the IP camera, please select the device you want to view and click the “Open Web” button. Then you could see the video from the IP camera directly. 1. To access the Web-based UI of the selected unit, run the Open Web on the menu bar.
Page 11
3. For the first installation, there will be a prompt to install the ActiveX control. 4. If the device has been configured correctly, the default Web browser will open to the home page of the selected device.
Further Information This guide is used to help you start-up your Fish-Eye IP Camera settings. It is also recommended to check the user manual in CD disk for more details of the system and user configuration.