Motorola AP 7161 Installation Manual page 65

Installation Guide
We encourage the manufacturers to include information for the users, including the operators and installers, to
ensure that they understand that it is incumbent on them to cooperate with manufacturers to implement any
changes necessary to facilitate compliance.
5 Devices may be optionally designed not to transmit on channels which overlap 5570 – 5680 MHz instead of
requiring installers to perform site-by-site adjustments. In that case it is still required that the devices should be
installed professionally and the procedures for registering the device in the industry database should be
included in the Users Manual.
6 When devices are deployed for mobility, do not assign frequencies of 5580 MHz and 5670 MHz.
7 A voluntary WISPA sponsored database has been developed that allows operators and installers to register the
location information of the UNII devices operating outdoors in the 5470 – 5725 MHz band within 35 km of any
TDWR location (see http://www.spectrumbridge.com/udia/home.aspx). This database may be used by
government agencies in order to expedite resolution of any interference to TDWRs.
8 For example, device software must not have any country code options or software configuration settings which
allow an end user to modify the DFS operation or impact the performance of DFS. See KDB 594280.
9 The TCBs are not permitted to approve transmitters with radar detection capabilities. See KDB 628591.
10 The manufacturers may consider taking steps providing clear instructions to operators and installers of devices
as to the need to comply with rules for use of the band, guidance on registration of devices and any other
processes that are designed to avoid interference. They may use methods that include, but are not limited to,
instructions in manuals, notification on product web pages and service bulletins issued for products in the
field.
65