Table of Contents
Advertisement
Note: Should the light turn Red during use when there is water still in the water tank,
there may be an air lock preventing the water entering the mist generator. If this
should happen, lift the water tank up and down just a little to allow the valve to open
and allow the water to flow.
There could also be mist escaping from the join between the water tank and mist
generator. This is normal and will stop after a while.
6.3 Oscillating Function
The fan is fitted with an Oscillating function where when activated,
the fan head will swing from side to side.
•
To activate, Press the clutch knob down.
•
To stop the oscillating, pull the knob up when the fan head is
in the desired position
7 Care and Cleaning
•
Ensure that the fan is switched off from the supply mains before removing the
guard (Grille).
•
Unplug the appliance during filling and cleaning.
•
To clean the blade and grille assembly, first remove the safety grille, unscrew the
locknut and remove the blade from the Misting Fan. Wipe them clean with a
slightly damp sponge.
•
Clean the motor housing and body assembly with a clean, damp cloth and wipe
dry.
•
To clean the water tank, rinse out with fresh clean cold water.
•
Never spray with liquids or submerge the Misting Fan in water or any other liquid.
•
Do not use flammable liquids, chemicals, abrasive creams, steel wool or scouring
pads for cleaning.
8 Storage
Switch off and unplug the fan.
Coil the cable loosely. Do not kink or pull the cable tight.
Store your fan in a cool, dry location.
Page 15 of 16
Hide quick links:
Advertisement
Table of Contents
