Table of Contents
Advertisement
5 Setting the Fan Head Angle
The Fan Head can be adjusted Up and Down so as to blow air at the required
height.
•
To Adjust, whilst holding the Fan Grille to support it, unscrew the knob located on
the side of the fan head assembly enough to allow the Fan Head to be tilted up or
down.
•
When at the desired angle, tighten the knob.
6 Fan, Timer and Misting Generator Operation
6.1 Using the Fan and Timer Function
The Fan has a three speed selection.
•
Ensuring the Fan has been assembled correctly, plug into the power point and
switch on.
•
If not using the Timer function, rotate the timer knob
anticlockwise to the "ON" position.
•
If you prefer the fan to automatically stop after a pre-set
time (up to approximately 60 minutes) rotate the timer
knob clockwise to the desired time setting.
•
For Low Fan Speed, press button "1"
•
For Medium Fan Speed, press button "2"
•
For High Fan Speed, press button "3"
•
To Turn Off, press button "0"
Page 13 of 16
Hide quick links:
Advertisement
Table of Contents
