0-T100 (Main Pc Board) - Pentax K100D Service Manual

12. 0-T100 (Main PC board)

*When replacing T100, transfer the related parts as shown figure.
[Caution] Be cairful when handling 0-T970. Inside of 0-T970 might be broke by impact or drop.
[Caution] Solder 4 lead wires at T100 side and arrange read wairs.
(3) A32
(2) A33
(DT18x18)
(1) A31
(110mm) Red
(110) Green
(105) Black
(115) Orange
(1) Connect CCD/SR flex connector (plig-in type)
(2) Install 0-T100 while connecting T200 connector (plig-in type) vertically.
[Caution] Do not pinch lead wire or flex.
(5)T979
(6)0-T970
76700 -38/94-
(4) Solder
(8)A226
(9)Red, Black,Orange, Green
(10)T8
(2)
(1)
(7)M8
0-T100