Asus TS300-E9-PS4 User Manual page 97

Power Down Unused Lanes [Auto]
Allows you to power down unused lanes. When set to [Auto], Bios will
power down unused lanes based on the max possible link width.
Configuration options: [Disabled] [Auto]
ASPM [Auto]
Allows you to control ASPM support for the PEG 1. This has no effect if
PEG is not the currently active device.
Configuration options: [Disabled] [Auto] [ASPM L0s] [ASPM L1]
[ASPM L0sL1]
PEG0 Max Payload size [Auto]
Allows you to set the PEG0 max payload size.
Configuration options: [Auto] [128 TLP] [256 TLP]
PEG1 Max Payload size [Auto]
Allows you to set the PEG1 max payload size.
Configuration options: [Auto] [128 TLP] [256 TLP]
Program PCIe ASPM after OpRom [Disabled]
Allows you to select when to program the PCIe ASPM.
[Disabled]
[Enabled]
Memory Configuration
Allows you to change memory information settings.
Maximum Memory Frequency [Auto]
Allows you to set the maximum memory frequency.
Configuration options: [ Auto] [1067] [1333] [1600] [1867] [2133]
Max TOLUD [Dynamic]
Allows you to set the maximum value of TOLUD. Dynamic assignment would adjust
TOLUD automatically based on largest MMIO length of installed graphic controller.
Configuration options: [Dynamic] [1 GB] [1.25 GB] [1.5 GB] [1.75 GB] [2 GB] [2.25 GB]
[2.5 GB] [2.75 GB] [3 GB] [3.25 GB] [3.5 GB]
Memory Scrambler [Enabled]
Set this item to enable or disable memory scrambler support.
Configuration options: [Disabled] [Enabled]
Memory Remap [Enabled]
Allows you to enable or disable memory remap above 4GB.
Configuration options: [Enabled] [Disabled]
ASUS TS300-E9-PS4
PCIe ASPM will be programmed before OpROM.
PCIe ASPM will be programmed after OpROM.
5-13