Table of Contents
Advertisement
2.8
Cable connections
•
•
2.8.1
Motherboard connections
Standard cables connected to the motherboard
1.
24-pin ATX power connector (from power supply to motherboard)
2.
8-pin 12V power connector (from power supply to motherboard)
3.
System fan connector (from system fan to motherboard)
4.
USB 3.0 connector (from motherboard to front I/O board)
5.
USB 2.0 connector (from motherboard to front I/O board)
6.
SATA connector (from motherboard to front 3.5-inch SATA/SAS backplane)
7.
Mini-SAS HD connector (from motherboard to SATA backplane)
8.
System auxiliary panel connector (from motherboard to front I/O board)
9.
System panel connector (from motherboard to front I/O board)
10. Serial General Purpose Input/Output connectors
2-26
The bundled system cables are pre-connected before shipment. You do not need to
disconnect these cables unless you will remove pre-installed components to install
additional devices.
Refer to Chapter 4 for detailed information on the connectors.
Chapter 2: Hardware Information
Advertisement
Table of Contents
