Table of Contents
Advertisement
This item functions only if there is a serial port (COM1) connector on a motherboard.
Power On By RTC [Disabled]
This item allows you to enable or disable RTC to generate a wake event. When set
to [Enabled], the items RTC Alarm Date (Days) and Hour/Minute/Second becomes
user-configurable where you can set values.
Configuration options: [Disabled] [Enabled]
SMART Settings
SMART Self Test [Enabled]
Allows you to run SMART Self Test on all HDDs during POST.
Configuration options: [Disabled] [Enabled]
WHEA Configuration
WHEA Support [Enabled]
Allows you to enable or disable the WHEA (Windows Hardware Error Architecture)
support.
Configuration options: [Disabled] [Enabled]
5-24
Chapter 5: BIOS Setup
Advertisement
Table of Contents
