Table of Contents
Advertisement
USB Mass Storage Driver Support [Enabled]
This allows you to enable or disable the USB Mass Storage driver support.
Configuration options: [Disabled] [Enabled]
Port 60/64 Emulation [Enabled]
This allows you to enable the I/O port 60h/64h emulation support. This should be
enabled for the complete USB keyboard legacy support for non-USB aware OSes.
Configuration options: [Disabled] [Enabled]
USB transfer time-out [20 sec]
Allows you to select the USB transfer time-out value.
Configuration options: [1 sec] [5 sec] [10 sec] [20 sec]
Device reset time-out [20 sec]
Allows you to select the USB device reset time-out value.
Configuration options: [10 sec] [20 sec] [30 sec] [40 sec]
Device power-up delay [Auto]
This allows you to set the maximum time the device will take before it properly reports
itself to the Host Controller.
Configuration options: [Auto] [Manual]
NVMe Configuration
Onboard LAN Configuration
This allows you to enable or disable the onboard LAN.
Intel LAN1–4 Enable [Enabled]
Allows you to enable or disable the Intel LAN.
Configuration options: [Disabled] [Enabled]
Intel LAN 1-4 ROM Type [PXE]/[Disabled]
Allows you to select the Intel LAN ROM type.
Configuration options: [Disabled] [PXE] [iSCSI]
5-18
Chapter 5: BIOS Setup
Advertisement
Table of Contents
