SamTimer User Manual page 7

www.SamTimer.com 1-888-SamTimer . sam@samtimer.com 13
The 2s will begin to flash. Press each pi ' ay switch nine
12
times until the display shows flashing 1 s.
11. Short press the center button again. The display will show
4. Short press the center button again and the play switches
3 - BYO BEEPS with the 3 flashing. Press the left play
three times. The Os will change to 3s. You have set the
switch twice and change the 3 to a 5. This means that the
first time-control for 50 moves in 1 112 hours.
clock will beep at each of the last five seconds of a byo ­
5. Short press the center button two more times. The dis ­
yomi period.
play will show 1 :30:00 with the Os for the tens digit flash­
12. Short press the center button again. The display will show
ing. You can now set the seconds for the starting time.
1 - DBL BEEPS with the 1 flashing. You may set the byo ­
(You might do this if you were setting the clock for the
yomi beeps for single or double beeps. Choose 0 for single
continuation of an adjourned game.)
beep and 1 for double beeps. Single beeps would be suit­
able in a quiet tournament hall while double beeps seem
6. Short press the center button two more times. 20 _ 1 :00
louder.
will appear on the display. This is the second time control
for this mode. Press each play switch once. The 2s will
13. Short press the center button again. The display will show
change to 3s. The second time-control is now set for 30
COPY to 0 with the 0 flashing. You could now save your
moves in 1 hour.
new settings to one of the twelve user modes by changing
the 0 to a number from 1 to 12. See the next two sections
7. Short press the center button five more times. You can
for more information about the user modes.
now set the seconds for the second time-control. You
would do this, for example, , i f you were setting the second
14. Long press the center button to stop setting the clock.
time-control for something like 01 - 0:01 :30.
2:00:00 will appear on the display. You may now start the
clock. The time you have just set will remain the new start ­
8. Short press the center button two more times. The dis ­
ing time for this mode until you alter it using the procedure
play will show 0 - BEEP 1 - LED with the digits flashing.
above, change modes, or turn the clock off.
Press the left play switch to change the 0 to a 1. This
means the "player-to-move lights" and the "beep-on ­
SECOND EXAMPLE:
move" features are on.
1. Turn the clock on with both play switches pressed. This will
9. Short press the center button again. The
~cHsplay
will
select all modes of the clock. The display will show SCR ­
show 0 - BEEP AT END with the 0 flashing. Press the left
1 and SCR - 2, mode identifiers for two Scrabble® modes.
play switch to change the 0 to a 1. This means the clock
Short press the center button eleven times until the display
will beep if the time runs'.down to 0:00:00.
shows CH - P1, CH - P1A. These are mode identifiers for
10. Short press the center button again. The display will
chess tournament modes with move counters. Press the left
show 0 - BEEP AT TC with the 0 flashing. Press the left
play switch. 40 - 2:00 will appear on the display. This is the
play switch to change the 0 to a 1. This means the dock
initial starting time for the CH - P1 mode.
will beep at the end of each time control.
2. Long press the center button. The first digit will start to flash.
The clock is now in set mode. Press each play switch once.
11. Short press the center button again. The display will
The 4s will change to 5s.
show 0 - HALT AT END with the 0 flashing. Press the left
3. Short press the center button to change to the next digit.
play switch to change the Oto a 1. This means both
The Os will start to flash. Press the center button again.