SamTimer User Manual

How to change challenge period times:
SamTimer flexible design allows you to set Hold/Challenge
times to any time period of your choice.
The following example shows how to change the Hold/
Challenge Time Interval from 1 minute 5 seconds to just 15 seconds:
1. Turn SamTimer on by pressing the center button
2. LONG-press the center button for a few seconds.
SamTimer beeps. The leading zeros will flash
3. Tap center button 5 times
4. Hold is displayed on left dial, 1:05 on the right
5. Tap right hand side button until the first digit before the
colon flashes 0
6. Tap center once
7. Tap the right hand side button until the first digit after the
colon flashes 1
8. Tap center button once
9. Tap the right hand side button until rightmost digit flashes 5
10. LONG-press center button until you hear the beep
That's it!
You might want to test you have done this correctly, by merely
tapping the right hand side button upon turning the clock on.
You will notice the courtesy hold indicator DASH on the upper
left side of the dial disappears after exactly 15 seconds.
Tiles may be drawn now, kept separate if necessary!
Happy scrabbling!
Feel free to email sam@samtimer.com with any questions!
For Repairs visit
samtimer.com/repair