Table of Contents
Related Manuals for NatComm DP4
Summary of Contents for NatComm DP4
- Page 1 DOOR PHONE For Technical Assistance Please Phone: (07) 5596 5128...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Description Page Door Phone Dimensions Page Description Continued Page Door Phone Range Page Door Phone Performance Page Camera Power Page Camera Wiring Page Mounting the Door Phone Page Operation Summary Page Balance Pot Adjustment Pages 12-13 Wiring Diagrams Pages 14-15 Wiring Connection... -
Page 3: Description
A/V Connectors: BNC The Camera is powered by the 4 wire connection to the Door Phone and separate power is not required unless the DP4 is to be located more than 70m away. If DP4 will be located more than 70m from the Door Phone controller, please advise Natcomm or your Dealer and a separate 12V regulated Power adaptor will be provided at no charge. -
Page 4: Door Phone Dimensions
MODEL DP4 DOOR PHONE Page 4 National Communications... -
Page 5: Description Continued
DESCRIPTION continued Our DP4 Door Phones can operate at distances of up to 300 meters from the Controller, providing high quality cabling such as CAT5 is used. Note - When located more than 70m from the Door Phone controller, the Camera will need to use a separate power source by using the supplied 12V regulated Power adaptor. -
Page 6: Door Phone Range
Digital Camera to be fitted. Optional Surface Mounting Kit is available. (130mm Wide, 264mm High, 30mm Depth). Model DP4 - FLUSH MOUNT Standard Size Fitted with a high resolution, low light Digital Colour Camera. Marine Grade Stainless Steel face plate. -
Page 7: Door Phone Performance
DOOR PHONE PERFORMANCE This product is IDEAL for RESIDENTIAL USE or COMMERCIAL USE, where ROAD NOISE is NOT HIGH. It is not designed for INDUSTRIAL USE where ambient noise will be constantly high. The volume of the audio communication on the internal phones should be comfortably audible (a similar level to a telephone call) providing : •... -
Page 8: Camera Power
CAMERA POWER he Integrated Camera is powered direct from the Door Phone, which receives it’s power via the 4 wire connection from the DS Controller. However, the power consumption of the Camera is approximately 150 mA and this cannot be supported over distances greater than 70 meters. -
Page 9: Camera Wiring
DP4 provides a BNC output for Video, which can be connected to standard TV’s, dedicated Video display units or both. If IP Video is required, the DP4 video output should be connected to an Analogue to Video IP Converter, such as the AXIS 241S. -
Page 10: Mounting The Door Phone
The Wall Mount Box should then be securely fixed within the recessed cavity using nails, dyna bolts or silicone. DP4 is then screwed onto the WMB by using 2 supplied stainless steel screws. SURFACE MOUNTING KITS... -
Page 11: Operation Summary
OPERATION After initial Power Up, the Door Phone will take up to 5 seconds to initialise. To commence a Door Phone call, you should press the BELL on the Door Phone briefly. The LED will then turn OFF and you will hear a RING TONE until the call is answered. -
Page 12: Balance Pot Adjustment
BALANCE POT ADJUSTMENT Balance Pot is located under this sealing plug. You will need to use a small standard blade screwdriver. Page 12 National Communications... -
Page 13: Important Notes
BALANCE POT ADJUSTMENT Your DOOR PHONE is preset at the factory for maximum performance. Our sophisticated circuitry is designed to measure the background noise present at your site and then apply maximum gain. In most cases you SHOULD NOT NEED TO MAKE ANY ADJUSTMENTS. If you are using Two Door Phones, it is possible that you will need to adjust the POT of one or both Door Phones to suit your specific site conditions. -
Page 14: Wiring Diagrams Pages
CONTROLLER WIRING SUPPLIED CABLE BLUE LOCK 2 LOCK 2 WHITE LOCK 1 BROWN ORANGE LOCK 1 BLACK POWER POWER YELLOW RED AUDIO AUDIO GREEN CAT5 CABLE or SOLID CORE CABLE The colours used are those of the wires in the supplied Interface box. Page 14 National Communications... - Page 15 DOOR PHONE WIRING BLACK POWER POWER YELLOW AUDIO AUDIO GREEN CAT5 CABLE or SOLID CORE CABLE The colours used are those of the wires in the supplied Interface box. National Communications Page 15...
-
Page 16: Wiring Connection
WIRING CONNECTION Solid core cable such as CAT5 should be used to connect between the DS Controller unit and the Door Phone unit. The DS Controller unit has a standard 8 wire RJ45 connector. The Door Phone uses a 4 position Phoenix Style plug. - Page 17 The RED WIRE of the connection box, carries one leg of the Audio Signal. It must connect to EITHER centre position (pin 2 or 3) of the supplied Phoenix plug. Note - Polarity is not important. The GREEN WIRE of the connection box, carries the other leg of the Audio Signal.
-
Page 18: Surface Mounting Kits
All kits have an integrated Rain Deflector. Model SMK2-V for DP2 units mounted vertically Model SMK2-H for DP2 units mounted horizontally Model SMK3-V for DP3, DP4, DP5 mounted vertically Model SMK3-H for DP3, DP4, DP5 mounted horizontally Page 18 National Communications... -
Page 19: Door Phone Covers
COVERS FOR VERTICAL MOUNTED DOOR PHONES Model DPC1-V : for Model DP1 Door Phone Model DPC2-V : for Model DP2 Door Phone Model DPC3-V : for Models DP3, DP4, DP5 COVERS FOR HORIZONTAL MOUNTED DOOR PHONES Model DPC2-H : for Model DP2 Door Phone... -
Page 20: Specifications And Warranty Information Pages
SPECIFICATIONS Dimensions (all in mm) 204 mm x 107 mm x 43 (D) Weight 540g Communications Connector : Phoenix 4 pin Video Connector ACMA COMPLIANT Supplier Number N 782 WARRANTY This device is guaranteed against defects from workmanship for a period of two years (24 months) from the date of purchase.