Mounting; Orientation; Rigging - Chauvet B-250 User Manual

Mounting

Orientation

Rigging

Mounting Diagram
B-250 Bubble Machine User Manual Rev. 8
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes section.
The Bubble Machine may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and fluid replenishment purposes.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight. See the
manual for weight information.
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has 13-mm holes, which are appropriate
for this purpose.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Mounting Clamp
Technical Specifications section of this
Safety Cable
Mounting Bracket
Bracket Adjustment
Knob x2
Page 7 of 11