Table of Contents
Advertisement
Product at a
Glance
Safety Notes
Page 4 of 11
Use on Dimmer
Outdoor Use
Sound-Active
DMX
Master/Slave
Please read the following Safety Notes carefully before working with the product. The
Notes include important safety information about installation, usage, and maintenance.
·
Always connect the product to a grounded circuit to avoid the risk of electrocution.
·
Always disconnect the product from the power source before cleaning or replacing
the fuse.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect the product from power cord by pulling or tugging on the cord.
·
If mounting the product overhead, always secure to a fastening device using a
safety cable.
·
Make sure there are no flammable materials close to the product when operating.
·
Always make sure that the voltage of the outlet to which you are connecting the
product is within the range stated on the decal or rear panel of the product.
·
The product is for indoor use only! (IP20) To prevent risk of fire or shock, do not
expose the product to rain or moisture.
·
Always install the product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the product's housing are blocked.
·
Never connect the product to a dimmer.
·
Make sure to replace the fuse with another of the same type and rating.
·
Never carry the product from the power cord or any moving part. Always use the
hanging/mounting bracket.
·
The maximum ambient temperature is 104 °F (40 °C). Do not operate the product at
higher temperatures.
·
Do not leave unused fluid in the reservoir for an extended period. The fluid
may thicken in the reservoir.
·
In the event of a serious operating problem, stop using the product immediately.
·
For best results, use CHAUVET® DJ bubble fluid
·
Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center.
·
To eliminate unnecessary wear and improve its lifespan, during periods of non-use
completely disconnect the product from power via breaker or by unplugging it.
·
Keep this User Manual for future consultation. If you sell the product to another
user, be sure that they also receive this document.
x
Auto Programs
x
Fixed voltage (120 V or 230 V)
x
Replaceable Fuse
x
User-Serviceable
x
B-250 Bubble Machine User Manual Rev. 8
x
P
P
x
Advertisement
Table of Contents
