Table of Contents
Advertisement
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OF WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY
PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER.
THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OFR REPLACEMENT PARTS THERETO, OR
ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
.
Problem
The power light on the gauge
panel does not light up when the
Scooter is turned on.
The power light on the gauge
panel lights up, but Scooter still
does not start.
The power light on the gauge
panel does not light up, and the
Scooter does not start.
When brake lever is squeezed,
Scooter does not stop.
Scooter is moving slower and
slower.
TROUBLESHOOTING
Possible Cause
1.
Battery is discharged.
2.
Blown instrument Panel Fuse.
3.
Loose electrical connect on inside
the Scooter.
1.
The thumb throttle is not operating
properly.
1.
Blown Battery Fuse.
1.
Brakes are not adjusted properly.
1.
Low battery.
2.
Battery is defective.
Page 11
Possible Solution
1.
Recharge Battery for 5 hours.
(See page 8.)
2.
Replace Fuse.
(See page 10.)
3.
Have a qualified service
technician examine the
connections.
1.
Have a qualified service technician
examine the thumb throttle.
1.
Replace Fuse.
(See page 10.)
1.
Properly adjust brakes.
(See page 9.)
1.
Recharge battery for 5 hours.
(See page 8.)
2.
Have a qualified service technician
replace battery.
Advertisement
Table of Contents
