Olympus XZ-2 Instruction Manual page 7

Turning on the camera and making the initial settings
When you turn on the camera for the fi rst time, a screen appears enabling to set the
language for the menus and messages displayed in the monitor, and the date and time.
1
After turning the camera on with the ON/OFF button, select a language
using FGHI and press the A button.
2
Use FG to select the
year for [Y].
3
Press I to save the
setting for [Y].
4
As in Steps 2 and 3, useFGHIto set [M] (month), [D] (day), [Time]
(hours and minutes), and [Y/M/D] (date order), and then press the A
button.
• For precise time setting, press the A button as the time signal strikes 00 seconds.
5
Use HI to select the
[x] time zone and then
press the A button.
• Use FG to turn daylight
saving time ([Summer]) on
or off.
Camera sleep operation
If no operations are performed for the time set, the camera enters "sleep" (stand-by)
mode. In this mode, the monitor turns off and all actions are canceled. The camera
activates again when you touch any button (the shutter button, q button, etc.). The
camera will turn off automatically if left in sleep mode for 5 minutes. Turn the camera on
again before use.
X
Y M D Time
2012 Y/M/D
Cancel
X
Y M D Time
2012 Y/M/D
Cancel
'12.10.26 12:30
Seoul
Tokyo
Summer
1
EN 7