Olympus XZ-2 Instruction Manual page 27

Sequential shooting/using the self timer
The camera will take sequential photos while the shutter button is pressed all the way
down. Alternatively, the self-timer can be used for self- or group-portraits or to reduce
camera shake when the camera is mounted on a tripod or otherwise fi xed in place.
1
Press the jY button (G) to display the direct menu.
2
Select an option using HI and press Q.
Single-frame
o
shooting
Sequential
j
shooting
High-Speed
O
BKT
7
Self-timer
Y12s
12 SEC
Self-timer
Y2s
2 SEC
$
Notes
• To cancel the activated self-timer, press the jY button.
• During sequential shooting, focus, exposure, and white balance are locked at the fi rst
frame (during [S-AF], [MF]).
• Bracketing is available only when [Bracketing] (P. 51) is selected.
#
Cautions
• During sequential shooting, if the battery check blinks due to low battery, the camera
stops shooting and starts saving the pictures you have taken on the card. The camera
may not save all of the pictures depending on how much battery power remains.
• Fix the camera securely on a tripod for self-timer shooting.
• If you stand in front of the camera to press the shutter button halfway when using the self-
timer, the photograph may be out of focus.
Shoots 1 frame at a time when the shutter button is pressed
(normal shooting mode).
Photographs are taken at about 5 frames per second (fps)
while the shutter button is pressed all the way down ([S-AF]
or [MF] selected for [AF Mode], P. 43).
Photographs are taken at about 15 frames per second (fps)
while the shutter button is pressed all the way down ([S-AF]
or [MF] selected for [AF Mode], (P. 43).
While the shutter button is pressed all the way down,
photographs are taken with automatically changing the
settings for each frame (bracket photography).
Press the shutter button halfway to focus, the rest of the way
down to start the timer. First, the self-timer lamp lights up for
approximately 10 seconds, then it blinks for approximately 2
seconds and the picture is taken.
Press the shutter button halfway to focus, the rest of the
way down to start the timer. The self-timer lamp blinks for
approximately 2 seconds, and then the picture is taken.
2
EN 27