Olympus XZ-2 Instruction Manual page 69

Adding information displays (G/Info Settings)
 Shooting information displays
Use [LV-Info] to add the following shooting information displays. The added displays are
displayed by repeatedly pressing the INFO button during shooting. You can also choose to not
show displays that appear at the default setting. g "Customizing camera settings" (P. 60)
I S O
200
P
Highlight & Shadow display
Highlight & Shadow display
Areas above the upper limit of brightness for the image are shown in red, those below the
lower limit in blue. g [Histogram Settings] (P. 60)
Display Level Guide
Displays the camera's tilt. The tilt is shown by the vertical bar, and the level is shown by the
horizontal bar. Use the level guide display as your target level.
 Playback information displays
Use [q Info] to add the following playback information displays. The added displays are
displayed by repeatedly pressing the INFO button during playback. You can also choose to
not show displays that appear at the default setting.
2012.10.26 12:30
To view multiple pictures, press the G button in full-frame playback.
L N 100-0020
2012.10.26 12:30 20
Single-frame
playback
L N
HD
01:02:03 01:02:03
0.0 0.0
125 125 F5.6
38 38
×10 ×10
15
Histogram display
W
T 2012.10.26 12:30
4 frames
I S O
200
P 0.0 0.0
125 125 F5.6
Level gauge display
Shadow Highlight
Highlight & Shadow display
W
2012.10.26 12:30
20 T
2012.10.26 12:30
9 frames, 25 frames
Index display
15
20
21
3
EN 69