Olympus XZ-2 Instruction Manual page 61

V Exp/p/ISO
Option
Metering
P+Metering
Noise Reduct.
Noise Filter
ISO
ISO-Auto Set
Bulb Timer
W #Custom
Option
# Slow Limit
w+F
X K/Color/WB
Option
WB
All >
W Keep Warm
Color
#+WB
Color Space
Choose a metering mode according to the scene.
If [On] is selected, the exposure is measured using the
selected AF target.
This function reduces the noise that is generated during
long exposures.
[Auto]: Noise reduction is only performed at slow shutter
speeds.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
• Noise reduction requires about twice the time needed to
record the image.
• Noise reduction turns off automatically during sequential
shooting.
• This function may not work effectively with some shooting
conditions or subjects.
Choose the amount of noise reduction performed at high
ISO sensitivities.
Set ISO sensitivity.
Choose the upper limit and default value used for ISO
sensitivity when [Auto] is selected for [ISO].
[High Limit]: Choose the upper limit for auto ISO sensitivity
selection.
[Default]: Choose the default value for auto ISO sensitivity
selection.
You can set the maximum time for bulb shooting.
Choose the slowest shutter speed available when a fl ash is
used.
When set to [On], it will be added to the exposure
compensation value and fl ash intensity control will be
performed.
Choose the white balance mode.
[All Set]: Use the same white balance compensation in all
modes except [CWB].
[All Reset]: Set white balance compensation for all modes
except [CWB] to 0.
Select [Off] to eliminate "warm" colors from pictures taken
under incandescent lighting.
Adjust white balance for use with a fl ash.
You can select how colors are reproduced on the monitor or
printer.
Description
Description
Description
V
c
MENU
g
42
26
18
—
44
—
18
W
c
MENU
g
24
—
X
c
MENU
g
38
—
—
—
—
3
EN 61