Sony HDC4800 Operating Instructions Manual page 40

OPERATION
Page name Item
Page No.
<SWITCH ASSIGN2> LENS VTR S/S
15 (U10)
FRONT RET1
FRONT RET2
HANDLE SW1
HANDLE SW2
ZOOM SPEED
<EXT SWITCH> RET CTRL CONNECTOR
16
RET1 Pin5
Settings
OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2
JN/SY models only.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD
CE/CN models only.
OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2
JN/SY models only.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD
CE/CN models only.
OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2
JN/SY models only.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD
CE/CN models only.
OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2,
ZOOM(T)
JN/SY models only.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, ZOOM(T)
CE/CN models only.
OFF, RETURN1 SW, RETURN2
SW, INCOM1, INCOM2,
ZOOM(W)
JN/SY models only.
OFF, RETURN1 SW, RETURN2
SW, ENG, PROD, ZOOM(W)
CE/CN models only.
0 to 99, 20
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, INCOM 1,
INCOM 2, EXTENDER, 5600K,
VF DETAIL, SPIRIT LEVEL,
FOCUS ASSIST, PinP, VF
ASSIGN SW1, VF ASSIGN SW2
JN/SY models only.
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, ENG,
PROD, EXTENDER, 5600K, VF
DETAIL, SPIRIT LEVEL, FOCUS
ASSIST, PinP, VF ASSIGN SW1,
VF ASSIGN SW2
CE/CN models only.
40
Description
Assigns a function to the VTR START/STOP switch on
the mounted lens.
This function works when each pin of the RET CTRL
connector contacts with GND (Pin3).