Sony HDC4800 Operating Instructions Manual page 52

FILE
Page name Item
Page No.
<REFERENCE> STORE FILE
F03
STANDARD
ALL PRESET
READ (USB t CAM)
WRITE (CAM t USB)
FILE ID
CAM CODE
DATE
READ (USB t CAM)
<USER GAMMA>
F04
PRESET
FILE ID
CAM CODE
DATE
<LENS FILE> STORE FILE
F05
No.
NAME
F NO
CENTER MARKER
H POS
V POS
STORE
<OHB FILE> STORE FILE
F06
Settings
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Max. 16 characters
Camera code
Date
Execute using ENTER.
Execute using ENTER.
Max.16 characters
Camera code
Date
Execute using ENTER.
1 to 17, 1
F1.0 to F3.4, F1.7
–20 to +20, 0
–20 to +20, 0
Execute using ENTER.
Execute using ENTER.
52
Description
Stores the current settings of the reference file items in
the reference file in internal memory.
Reads the standard values in the reference file in
internal memory.
Returns all settings stored in internal memory to the
factory-presets.
Loads a reference file from a USB drive.
Writes the current settings of the reference file items
as a reference file to a USB drive.
Enters a comment for the reference file to be written to
a USB drive.
See "To specify a character string" (page 26).
Display only
Display only
Reads the user gamma file from a USB drive.
Sets the user gamma file items to the preset values in
internal memory.
Enters a comment for the user gamma file to be written
to a USB drive.
See "To specify a character string" (page 26).
Display only
Display only
The center marker is not included.
1 to 16: When using a non-serial lens (When using a
large lens, this setting depends on the internal
setting of the lens.)
17: When using a serial lens
Changeable only when using a non-serial lens.
Changeable only when using a non-serial lens.
Sets and stores the center marker position:
H POS: Increasing the value moves the position to the
right.
V POS: Increasing the value moves the position
downwards.
Stores the offset values of items specific to the CMOS
image sensor (once stored, the values do not need to
be stored again if the sensor is reinstalled).