Menu Operations; Starting Menu Operations - Sony HDC4800 Operating Instructions Manual

CAM T BPU: Light sensor level at the BPU connector
(page 7) of the camera
CAM t BPU: Light sensor level at the CAMERA connector of
the BPU
BPU T CCU: Light sensor level at the CCU connector of the
BPU
BPU t CCU: Light sensor level at the CAMERA connector of
the CCU
Note
If a camera control unit other than an HDCU2000/2500 is
connected, correct indications may not be obtained.

Menu Operations

The menus displayed on the viewfinder screen enable various
settings of the camera.
The following controls are used to operate the menus.
Press
MENU SEL knob/ENTER button

Starting Menu Operations

To display a menu page
Set the DISPLAY switch from OFF to MENU.
The menu page that last operated will be displayed.
(If it is the first time, the CONTENTS page of the OPERATION
menu will be displayed.)
To display the TOP MENU screen
If you set the DISPLAY switch from OFF to MENU while
holding the MENU SEL knob/ENTER button pressed, "TOP" is
displayed at the upper right corner of the screen. Selecting it
displays the TOP MENU screen, which lists the available
menus, and you can select the menus on this screen.
TOP MENU screen
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
To disable the "TOP" indication
Turn the power once off then on again, or set the DISPLAY
switch from OFF to MENU while holding the CANCEL/
STATUS switch pressed to CANCEL. This disables the TOP
selection.
24
Turn
DISPLAY switch
CANCEL/STATUS switch