Xerox Phaser 6360 User Manual page 75

7.
8.
Downloaded From ManualsPrinter.com Manuals
If you selected
New Custom Size
a. For Short Edge, use the Up Arrow and Down Arrow buttons to specify the short
edge, and then press the OK button.
b.
For Long Edge, use the Up Arrow and Down Arrow buttons to specify the long
edge, and then press the OK button.
c. If the control panel prompts you for the Paper Orientation, use the Up Arrow and
Down Arrow buttons to select the direction you are feeding the paper into the tray.
H
Short-Edge Feed
Note: When you define a new custom size, it is stored in the printer so it can be used
again. Up to five custom sizes can be stored in the printer. If you define a new custom size
after five custom sizes have been stored, the new custom size replaces the bottom custom
size entry.
Either use the custom size as the document size in the application or select Tray 1 (MPT)
in the driver as the paper source.
Phaser® 6360 Color Laser Printer
:
6360-058
Long-Edge Feed
3-46
Printing on Specialty Media
H
6360-057