Handover Tone - NEC MH250 User Manual

• HANDOVER TONE

Factory Default: Off
The handset can provide warning tone when handover
takes place.
Handover is the process of transferring a wire-
01:AbcDefg
02:HigkLmn
less phone user from one Access Point to
03:OpqrStu
TIP
another.
- Press soft key in standby mode to display
Func
the main menu.
- Press key to select "04. Setting" and then press
soft key.
OK
01. Call Log
02. Phone Book
03. Speed Dial
04. Setting
- The handset displays the Setting menu.
- Press key to select "02. Sounds".
01. Display
02. Sounds
03. Date & Time
04. Password
05. 言語設定
- Press soft key. Sounds menu appears.
OK
- Press key to select "10. Handover Tone" and
then press soft key.
OK
PM 02:58
Menu
OK Back
PM 02:58
Setting
OK Back
07. Key Click Tone
08. MOH Select
09. RTP Alarm
10. Handover Tone
- Select ON or OFF by using
soft key.
OK
On
Off
48
PM 02:58
Sounds
OK Back
key and then press
PM 02:58
Handover Tone
OK Back