Confirming The Camera Image - Panasonic BL-WV10A Operating Instructions Manual
Wireless camera monitoring system
Hide thumbs
Also See for BL-WV10A:
- Setup manual (20 pages) ,
- Setup manual (14 pages) ,
- Service manual (56 pages)
Table of Contents
Advertisement
2 Connecting Cameras
2.4.6
Confirming the Camera Image
1.
Turn on the router and the cameras connected to the router.
Router
2.
Set the mode switch on the back of the BL-WV10A to [NORMAL] and turn it
on.
3.
Turn on the cameras connected to the BL-WV10A.
Note
•
To use a wireless connection for the wireless camera BL-C30A,
disconnect it from the Ethernet cable, set the camera switch to
[WIRELESS] and turn the camera on again.
•
After the launch screen, the Camera Monitoring Screen will appear.
50
BL-WV10A
Ethernet
cable
Switch
Bottom of BL-C30A
Video
cable
Ethernet
cable
TV
Advertisement
Table of Contents
