Panasonic BL-WV10A Operating Instructions Manual page 36

Wireless camera monitoring system
Hide thumbs Also See for BL-WV10A:
Table of Contents

Advertisement

2 Connecting Cameras
1.
Connect the cameras using the Ethernet cables provided with them to any of
the LAN jacks on the BL-WV10A or BB-HGW700A.
Connect the cameras while the BB-HGW700A is connected to the BL-
WV10A.
Rear panel of
BL-WV10A
2.
Turn on the cameras.
Quick Setup will register each camera.
Note
If a camera needs to be restarted during Quick Setup, camera
configuration and restart will take about 2 minutes.
During Quick Setup, the wireless indicator will be green.
36
LAN jacks
Ethernet cable
Ethernet cable
Switch
Bottom of BL-C30A
To configure a BL-
C30A wireless camera
Rear of camera
using the Quick Setup
utility, set the switch on
the bottom of the
camera to [WIRED]
Rear panel of BB-HGW700A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bl-ms103a

Table of Contents