1.11 Confirming The Camera Image - Panasonic BB-HCM311A Installation/Troubleshooting Manual

Installation/Troubleshooting

1.11 Confirming the Camera Image

1.
Start up the web browser on your PC.
2.
Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and
press [Enter] on the keyboard.
• When port number is 80 (default), you do not need to enter port number.
See page 43 of the Operating Instructions on the Setup CD-ROM for
details about port number.
• For IPv6 connection, see page 14 and page 15 of the Operating
Instructions on the Setup CD-ROM and prepare the requirements. Enter
the "http://(IPv6-registered URL):Port Number" on the address bar.
• If the camera image is not displayed, see page 44.
3.
The Enter Network Password window is displayed, and enter the user name
and password that were set, and click [OK].
Note
When [Permit access from guest users] is set on the Security: Administrator
page, authentication window will not be displayed.
4.
Click the following tabs to display each page.
A To Single Camera page
(page 16 of Operating Instructions)
C To Buffered Image page
(page 33 of Operating Instructions)
E To Maintenance page
(page 113 of Operating Instructions)
G To log in to the camera
(page 76 of Operating Instructions)
32
A B C
Version Number
D E F
B To Multi-Camera page
(page 31 of Operating Instructions)
D To Setup page
(page 38 of Operating Instructions)
F To Support page
(page 122 of Operating Instructions)
G
Select a language.
Displays IPv4, IPv6
or IPsec connection.