7 Adjust settings
Note
•
If the setup option is grayed out, it means the setting
cannot be changed at the current state.
General setup
1
Press SETUP.
» [General Setup] menu is displayed.
2
Press
to enter the submenu.
3
Select an option, and then press OK.
4
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press
[Disc Lock]
Set the play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
•
[Lock] - Restrict the access to the current
disc. At the next time when you want to play
this disc or unlock it, you need to enter the
password.
[Unlock] - Play all discs.
•
[OSD Language]
Select a language for on-screen menu.
[Sleep Timer]
Switch automatically to standby at the preset time.
•
[Off] - Disable sleep mode.
[15 Mins], [30 Mins], [45 Mins], [60 Mins] -
•
Select the countdown time for this product to
switch to standby.
[Auto Standby]
Turn on/off the auto standby mode.
[On] - Switch to standby after 15 minutes
•
of inactivity (for example, in pause or stop
mode).
•
[Off] - Disable the auto standby mode.
SETUP.
Audio setup
Audio Setup
Analogue Output
Digital Audio
Volume
Sound Mode
CD Upsampling
Night Mode
1
Press SETUP.
» [General Setup] menu is displayed.
2
to select [Audio Setup], and then
Press
press
to enter the submenu.
3
Select an option, and then press OK.
4
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK .
•
To exit the menu, press
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
•
[LT/RT] - For the surround sound output
through two speakers.
•
[Stereo] - For the stereo output.
[Digital Audio]
Select a digital setting based on the digital amplifier/
receiver that is connected through the digital jack
(coaxial/digital).
•
[Digital Output] - Select a type of digital output.
[All] - Support multi-channel audio formats.
•
•
[Off] - Disable digital output.
[PCM Only] - Downmix to two-channel
•
audio format.
[LPCM Output] - Select the LPCM (Linear
•
Pulse Code Modulation) output sampling rate.
[48kHZ] - For discs recorded at sampling
•
rate of 48 kHz.
[96kHZ] - For discs recorded at sampling
•
rate of 96 kHz.
Note
•
[LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only].
•
The higher the sampling rate, the better the sound
quality.
SETUP.
EN
13