Contents Important Safety and important notice Trademark notice Your DVD player Playable media Product overview Connect Connect audio/video cables Optional audio connections Connect power Get started Prepare the remote control Find the TV input channel Select menu display language Turn on progressive scan Play Play a disc Play video...
Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area.
2 Your DVD player Remote control Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Playable media This product can play: • DVD, DVD-Video, DVD+R/+RW, DVD-R/- RW, DVD+R/-R DL (Dual Layer) • Video CD/SVCD • Audio CD, CD-R/CD-RW •...
3 Connect BACK • Return to the previous display menu. Make the following connections to use this product. • Skip to the previous or next title, chapter, Basic connections: or track. • Video • Audio • Mute or restore audio output. Optional connections: h Numeric buttons •...
Connect the audio cables (supplied) to: Option 2: Connect to the video (CVBS) • AUDIO OUT L/R jacks on this jack product. • the audio input jacks on the device. Connect power VIDEO IN AUDIO IN Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the unit.
4 Get started Press to select a language, and then press Prepare the remote control Turn on progressive scan Press and push the battery compartment to slide it open (see “1” in the illustration). Note Insert two AAA batteries with correct polarity (+/-) as indicated. • To use the progressive scan feature, you must connect a progressive scan TV with the component video jacks (see Push and slide back the battery compartment “Connect”...
5 Play Button Action Start, pause or resume disc play. Play a disc Stop disc play. Skip to a previous/next title or Caution chapter. Search fast-backward or fast- • Do not place any objects other than discs into the disc forward.
Page 9
Display the contents menu via one of the Note following ways: • If PBC is on, load in a VCD/SVCD. • Applicable only to discs that contain multi-angle scenes. • During play with PBC on, press BACK. Press the Numeric buttons to select a play Repeat play for a specific section option, and then press OK to start play.
• To enlarge the selected photo and start Press the numeric buttons to change the time/ slideshow, press OK. number to skip to. BACK. • To return to the menu, press Play MP3/WMA music Note MP3/WMA is a type of highly compressed audio file (files with .mp3, .wma extensions). • It may require longer time to display the disc content Insert a disc that contains the MP3/WMA music.
6 Other features 1) I n the [Karaoke Scoring] option, select a level (basic/intermediate/advance). 2) I n the [Karaoke Idol] option, turn on the Karaoke contest. » The song selection menu is displayed. You can connect a microphone (not supplied) to sing 3) I nput a track (VCD/SVCD) or a title/chapter along with a music source. (DVD) as the first song. Up to 4 songs can be selected. Note 4) T hen select [Start], and press OK to start play •...
7 Adjust settings Audio setup Audio Setup Note Analogue Output Digital Audio • If the setup option is grayed out, it means the setting Volume cannot be changed at the current state. Sound Mode CD Upsampling Night Mode General setup Press SETUP.
[Volume] Press SETUP. Set a volume level when you play a disc. » [General Setup] menu is displayed. to select [Video Setup], and then Press 1. Press OK. press to enter the submenu. 2. Press to set the volume. Select an option, and then press OK. 3.
Select a picture as the wallpaper. Select an audio language for disc play. [Default picture] - The default wallpaper [Subtitle] • preset as the Philips logo. Select a subtitle language for disc play. [Saved picture] - A captured video image or [Disc Menu] •...
Caution • This information is required when you want to find out • Never use solvents such as benzene, thinner, cleaners if a newest software version is available at the Philips available commercially, or anti-static sprays intended website that you may download and install on this for discs. product.
• Analog stereo output support at www.philips.com/welcome. • Signal to noise ratio (1 kHz): > 95 dB If you contact Philips, you will be asked for the model (A-weighted) and serial number of your product. The model • Dynamic Range (1 kHz): > 80 dB (A-weighted) number and serial number are on the back of your •...
10 Glossary Sound No audio output from the TV. • Ensure that the audio cables are connected to the audio input of the TV. • Assign the audio input of the TV to the Aspect ratio corresponding video input. See the TV user Aspect ratio refers to the length to height ratio of manual for details.