Table of Contents
Advertisement
7 Adjust settings
Note
•
If the setup option is grayed out, it means the setting
cannot be changed at the current state.
General setup
1
Press SETUP.
» [General Setup] menu is displayed.
2
Press
to enter the submenu.
3
Select an option, and then press OK.
4
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK.
•
To exit the menu, press
[Disc Lock]
Set the play restriction for a disc which is loaded in
the disc compartment (maximum 20 discs can be
locked).
•
[Lock] – Restrict the access to the current
disc. At the next time when you want to play
this disc or unlock it, you need to enter the
password.
•
[Unlock] – Play all discs.
[OSD Language]
Select a language for on-screen menu.
[Sleep Timer]
Switch automatically to standby at the preset time.
•
[Off] – Disable sleep mode.
•
[15 Mins], [30 Mins], [45 Mins], [60 Mins] –
Select the countdown time for this product to
switch to standby.
[Auto Standby]
Turn on/off the auto standby mode.
•
[On] – Switch to standby after 15 minutes
of inactivity (for example, in pause or stop
mode).
•
[Off] – Disable the auto standby mode.
14
EN
SETUP.
[DivX(R) VOD Code]
®
Display the DivX
registration code and
deregistration code.
•
[Registration] – Obtain a registration code to
register this product on website.
•
[Deregistration] – Obtain a deregistration
code to cancel the registration of this product
on website.
Note
•
Use this product's DivX registration code when you rent
or purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
(Video On Demand) service can be played only on the
device to which it is registered.
Audio setup
1
Press SETUP.
» [General Setup] menu is displayed.
2
Press
to select [Audio Setup], and then
press
to enter the submenu.
3
Select an option, and then press OK.
4
Select a setting, and then press OK.
•
To return to the previous menu, press
BACK .
•
To exit the menu, press
[Analogue Output]
Select an analogue setting based on the audio
device that is connected through the analogue
audio jack.
•
[LT/RT] – For the surround sound output
through two speakers.
•
[Stereo] – For the stereo output.
[Digital Audio]
Select a digital setting based on the digital amplifi er/
receiver that is connected through the digital jack
(coaxial/digital).
•
[Digital Output] – Select a type of digital
output.
•
[All] – Support multi-channel audio formats.
®
VOD
SETUP.
Advertisement
Table of Contents
