[Password]
Set or change the password for locked discs and
play restricted DVDs.
1. Press the Numeric buttons to enter '136900' or
the last set password at [Old Password] field.
2. Enter the new password at [New Password]
field.
3. Enter the new password again at
[Confirm PWD] field.
4. Press OK to exit the menu.
Note
•
If you forget the password, enter '136900' before you set
a new password.
[Version Info]
Display the software version of this product.
Note
•
This information is required when you want to find out
if a newest software version is available at the Philips
website that you may download and install on this
product.
[Default]
Reset all the settings of this product to factory
default, except for [Disc Lock], [Parental Control]
and [Password] settings.
EN
16
8 Additional information
Update software
For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
Caution
•
Power supply must not be interrupted during software
upgrade.
1
Press SETUP.
2
Select [Preferences] > [Version Info], and
then press OK.
3
Write down the file name, and then press
SETUP to exit the menu.
4
Visit www.philips.com/support to check for
the latest software version, using the file name
for this product.
5
Refer to the upgrade instructions on the
website for more information.
Note
•
Disconnect the power cord for a few seconds and
connect again to turn on the product.
Care
Caution
•
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
Wipe the disc with a micro fibre cleaning cloth from
the centre to the edge in a straight line movement.