Connect power Get started Prepare the remote control Find the TV input channel Select menu display language Turn on progressive scan Use Philips EasyLink Play Play a disc Play video Play music Play photo Play from a USB fl ash drive...
The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Copyright notice This item incorporates copy protection technology that is protected by U.S.
LLC. 2 Your DVD player Congratulations on your purchase, and welcome to ® is a Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/ welcome. Playable media This product can play: •...
Remote control • Turn on the unit or switch to standby. • Open or close the disc compartment. c DISC MENU • Access or exit the disc menu. • Switch to the disc mode. • During a photo slideshow, switch between Fun Mode (color) and Simple Mode (black and white).
Note • If the device supports HDMI CEC, you can control compliant devices with a single remote control (see “Get started” > “Use Philips EasyLink”). Option 2: Connect to the component video jacks COMPONENT VIDEO OUT Connect the component video cables (not supplied) to: •...
Connect multi channel receiver FRONT L REAR L FRONT R REAR R MULTICHANNEL AUDIO IN Connect the audio cables (not supplied) to: • AUDIO OUT ( FRONT L/R, REAR L/R, CENTER and SUBWOOFER) jacks on this product. • the audio input jacks on the device. Connect to digital amplifi...
Push and slide back the battery compartment (see “3” in the illustration). Note • If you are not going to use the remote control for a long time, remove the batteries. • Do not mix batteries (old and new or carbon and alkaline, etc.).
Use Philips EasyLink This product supports Philips EasyLink which uses the HDMI CEC (Consumer Electronics Control) protocol. You can use one single remote control to control EasyLink-compliant devices that are connected through HDMI connectors. Note • To enable the EasyLink feature, you must turn on the HDMI CEC operations on the TV and on other devices connected to TV.
Page 10
Access DVD menu Press DISC MENU to access the disc root menu. Select a play option, then press OK. • In some menus, press the buttons to input your selection. Access VCD menu The PBC (playback control) feature is available for VCD/SVCD, which can display the contents menu for you to select a play option.
Note • You can only play DivX (Ultra) video that is rented or purchased with the DivX registration code of this product (see “Adjust Settings” > “General setup” > [DivX(R) VOD Code]). Play music Control a track Play a track. Use the remote control to control the play.
Note • It may require longer time to display the disc content on the TV due to the large number of songs/photos compiled onto one disc/USB fl ash drive. • If the JPEG photo is not recorded with an ‘exif ’ type fi...
Note • When you copy, never press any button. • Copy-protected media cannot be copied. Create MP3 fi les With this product, you can convert audio CDs into MP3 audio fi les. The created MP3 audio fi les are saved in the USB fl...
• [Unlock] - Play all discs. [OSD Language] Select a language for on-screen menu. [Sleep Timer] Switch automatically to standby at the preset time. • [Off] - Disable sleep mode. • [15 Mins], [30 Mins], [45 Mins], [60 Mins] - Select the countdown time for this product to switch to standby.
[Personal] - Customize the color setting. Set the level of brightness, contrast, tint and color saturation, then press OK. [My Wallpaper] Select a picture as the wallpaper. • [Default picture] - The default wallpaper preset as the Philips logo. SETUP.
You must turn on the HDMI CEC operations on the TV/ devices before you can enjoy the EasyLink controls. See the TV/devices manual for details. • Philips does not guarantee 100% interoperability with all HDMI CEC compliant devices. Preferences Note •...
Page 17
Display the software version of this product. • This information is required when you want to fi nd out if a newest software version is available at the Philips website that you may download and install on this product. [Default]...
If you contact Philips, you will be asked for the model and serial number of your product. The model number and serial number are on the back of your product.
• See the TVs user manual on how to select the correct input on the TV. Change the TV channel until you see the Philips screen. • If you have turned on the progressive scan setting or change the TV system setting, switch back to default mode: 1) Press open the disc compartment.
Page 20
HDMI High-Defi nition Multimedia Interface is a high-speed digital interface that can transmit uncompressed high defi nition video and digital multichannel audio. It delivers high quality picture and sound quality, completely free from noise. HDMI is fully backward-compatible with DVI. As required by the HDMI standard, connecting to HDMI or DVI products without HDCP (High- bandwidth Digital Content Protection) will result in...
Need help?
Do you have a question about the DVP3588/94 and is the answer not in the manual?
Questions and answers