Hard drive
Description
Hard drive, 1 TB
Hard drive, 500 GB
Hard Drive Hardware Kit
Before disassembling the dock, follow this step:
▲
Remove the bottom cover (see
Remove the hard drive:
1.
Remove the four Phillips PM2.0×3.0 screws (1) that secure the hinges to the dock.
2.
Pull the hard drive away from the connector (2), and then remove the hard drive from the dock (3).
3.
To remove the hard drive brackets, remove the four Phillips PM3.0×3.0 screws (1) that secure the
brackets to the hard drive.
42
Chapter 5 Removal and replacement procedures
Bottom cover on page
40).
Spare part number
762990-005
778186-005
902362-001