Table of Contents
Advertisement
(6) Right speaker cable (see
(7) Front webcam (see
(8) WLAN antennas (see
2.
Remove the broadhead Phillips PM2.0×2.0 screw (1) that secures the system board to the display panel
assembly.
3.
Lift the right side of the system board up (2), and then pull the board toward the right, away from the
connectors on the side of the display, and then out of the display enclosure (3).
Reverse this procedure to install the system board.
Speakers on page
30)
Front webcam module on page
Antenna on page
27)
26)
Tablet component replacement procedures
39
Hide quick links:
Advertisement
Table of Contents
