Table of Contents
Advertisement
5.2.1
Creating a RAID set
To create a RAID set:
1.
From the utility main menu, select 1. Create RAID Volume and press <Enter>.
2.
Key in a name for the RAID set and press <Enter>.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023
[
]Change
3.
Press the up/down arrow keys to select a RAID Level that you wish to create then
press <Enter>.
4.
From the Disks item field, press <Enter> to select the hard disk drives that you want to
include in the RAID set.
Port
0
1
2
3
[
5.
Use the up/down arrow keys to move the selection bar then press <Space> to select a
disk. A small triangle before the Port number marks the selected drive. Press <Enter>
when you are done.
5-6
Copyright(C) 2003-12 Intel Corporation.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Syne:
Enter a unique volume name that has no special characters and is
[TAB]-Next
[
Drive Model
Serial #
ST3300656SS
HWAS0000991753TR
ST3300656SS
37VN00009846RAJ1
ST3300656SS
397600009846UEDY
ST3300656SS
GWC50000991756G6
Select 2 disks to create volume.
]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done
[
CREATE VOLUME MENU
Volume0
RAID0(Strips)
Select Disks
128KB
0.0
GB
N/A
Create Volume
[
HELP
]
16 characters or less.
[ESC]-Previous Menu
SELECT DISKS
]
Size
279.3GB
279.3GB
279.3GB
279.3GB
All Rights Reserved.
]
[ENTER]-Select
Status
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Non-RAID Disk
Chapter 5: RAID Configuration
Advertisement
Table of Contents
