Panasonic AW-E860L Operating Instructions Manual page 35

Notes
• Only 0 dB, 9 dB, or 18 dB can be selected in case of
using the RCU (RCB).
• 0 dB when the manual GAIN switch on the hybrid
control panel is at LOW, 9 dB when it is at MID, or
18 dB when it is at HIGH.
Manual GAIN switch
Hybrid control panel
Black Level Setting [Pedestal: –150 to +150]
The black level (pedestal) of the luminance (Y) signal can
be set. Used in adjusting the black levels of two or more
cameras.
2 Colour Set Display
Chroma Level Adjustment [Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to any of
three levels each. The signal output to the optional card
cannot be adjusted.
Skin Colour Adjustment [Flesh Tone: –3 to +3]
Skin colour can be decreased or increased to any of
three levels each.
White Balance Setting
[White Bal: ATW, AWC A, AWC B, 3200K, 5600K]
ATW: The white balance is automatically adjusted to
be always right.
AWC A, AWC B:
Once the white balance is adjusted with the
ITEM/AWC switch on the back of the camera, it
is no longer necessary to set the white balance
again if you simply select AWC A or AWC B,
provided that the camera is used under the same
conditions.
Fine colour adjustment can be made after setting
AWC by red/blue gain adjustment in user mode
or from the RCU (RCB).
3200K: The white balance is adjusted to 3200K
illumination.
- 34 (E) -