Interface Overview; Power Supply 24 Vdc / Backup - ADS-tec IF1100 User Manual

IF1000 series

5.7 Interface Overview

Abb. 7:
The device has the following interfaces (front):
1. Power
2. Backup
3. CUT& ALARM plug (4 pole COMBICON plug)
4. LAN-in with RJ45 (PoE) or LWL fibre optic connection
5. 9 pole SUB-D connector / RS232
6. LAN-out with 4x RJ45 connection
Note:
All input voltages can be hooked up redundantly (Power, Backup and PoE
via LAN-in).

5.7.1 Power Supply 24 VDC / BackUp

The supply voltage implements a lead-through terminal with screw connection (the illustration shows the
jack provided in the device))
Pin-Number
1
2
PIN 1: = L+ 24V DC Power Supply
PIN 2: = GND Ground
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • D-72622 Nürtingen
24V DC voltage supply (2 pole COMBICON plug)
24V DC BACKUP voltage supply (2 pole COMBICON plug)
Signal-Name
24V DC
0 V DC
33