Multi-Ssid - D-Link DAP-2553 User Manual

Section 3 - Configuration
The device supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary SSID.
The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Enable
Check to enable support for multiple SSIDs.

Multi-SSID:

Enable Priority :
Check to enable the priority support for Multi-
SSID
Band:
This read-only value is the current band setting.
Index:
You can select up to three multi-SSIDs. With
the Primary SSID, you have a total of four
multi-SSIDs.
SSID:
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID's factory default setting is
SSID can be easily changed to connect to an
existing wireless network or to establish a new
wireless network.
SSID Visibility:
Enable or Disable SSID visibility. Enabling this
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Security:
The Multi-SSID security can be Open System, WPA-Personal, or WPA-Enterprise. For a detailed description of the Open System
parameters, please go to page 23. For a detailed description of the WPA-Personal parameters, please go to page 24. For a detailed
description of the WPA-Enterprise parameters, please go to page 25.
D-Link DAP-2553 User Manual
Multi-SSID
dlink.
The
35