Configuration - D-Link DAP-2553 User Manual

Section 3 - Configuration

Configuration

To configure the DAP-2553, use a computer that is connected to the DAP-2553 with an Ethernet cable (see the Network Layout
diagram ).
First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet
Options > Connections > LAN Settings and uncheck the enable box.
Launch your web browser.
Type the IP address and http port of the DAP-2553 in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the DAP-
2553 and your computer are in the same subnet.
Note: If you have changed the default IP address assigned to the DAP-2553, make sure to
enter the correct IP address.
Enter the user name (admin) and your password.
Leave the password field blank by default, and
click Login.
Note: If you have changed the password, make sure to enter the correct password.
D-Link DAP-2553 User Manual 15