Advanced Settings; Performance - D-Link DAP-2553 User Manual

Section 3 - Configuration
Wireless Band:
Indicate 2.4GHz or 5GHz.
Wireless:
Use the drop-down menu to turn the wireless
function On or Off.
Wireless Mode: The different combination of clients that can be
supported include Mixed 802.11n, 802.11g
and 802.11b, Mixed 802.11g and 802.11b and
802.11n Only in the 2.4 GHz band and Mixed
802.11n and 802.11a, 802.11a only, and
802.11n Only in the 5 GHz band. Please note
that when backwards compatibility is enabled
for legacy (802.11a/g/b) clients, degradation of
802.11n wireless performance is expected.
Data Rate*: Indicate the base transfer rate of wireless adapters
on the wireless LAN. The AP will adjust the base
transfer rate depending on the base rate of
the connected device. If there are obstacles or
interference, the AP will step down the rate. This
option is enabled in Mixed 802.11g and 802.11b
mode (for 2.4 GHz) and 802.11a Only mode (for
5 GHz). The choices available are Best (Up to 54),
54, 48, 36, 24, 18, 12, 9, 6 for 5 GHz and Best (Up
to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1
for 2.4 GHz.
*Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual data throughput may vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead can lower actual data throughout rate.
D-Link DAP-2553 User Manual

Advanced Settings

Performance

30