Introduction
1.1
Purpose of this documentation
These instructions contain all information that you will require to commission and use the
device. Read these instructions carefully prior to installation and commissioning. In order to
use the device correctly, first make yourself acquainted with its principle of operation.
The instructions are aimed both at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it as well as service and
maintenance engineers.
1.2
History
This history establishes the correlation between the current documentation and the valid
firmware of the device.
The documentation of this edition is applicable for the following firmware:
Edition
01
06/2006
02
03/2008
03
06/2010
The most important changes in the documentation when compared with the respective
previous edition are given in the following table.
Edition
01
06/2006
02
03/2008
03
06/2010
SITRANS TH200/TH300
Operating Instructions, 06/2010, A5E00393069-03
Firmware identifier
System integration
nameplate
FW: 01.01.02
TH200: SIPROM T V1.07
HW: 01.00
TH300: PDM V6.0
DD Rev. 1.00
FW: 01.01.04
TH200: SIPROM T V1.2.1
HW: 01.02
TH300: PDM V6.0
DD Rev. 1.00
Remark
First edition
Revision of content and layout
Further supplements on topic "Functional safety"
Revised: Abbreviations and glossary.
1
Installation path for PDM
TH200: not relevant
TH300: SITRANS TH300
TH200: not relevant
TH300: SITRANS TH300
7