Table of Contents
Advertisement
Installation
4.3 Installation on DIN rail and G rail
4.3
Installation on DIN rail and G rail
CAUTION
Electromagnetic compatibility
If the sensor is installed outside a closed building, you must check the transmitter for
correct functioning following a lightning stroke.
Note
Fixing rings
The fixing rings included in the scope of delivery for the transmitter are not required for the
installation on DIN rails or G rails.
You can either install the transmitter on a 35 mm DIN rail or on a 32 mm G rail.
DIN EN 60715 applies to DIN rails and G rails in this context. The DIN rail adapter required
for installation can be ordered as an accessory under the Order No. 7NG3092-8KA.
Adhere to the ambient conditions specified in the technical data.
Figure 4-1
Figure 4-2
22
Securing the transmitter on DIN rails
Securing the transmitter on G rails
SITRANS TH200/TH300
Operating Instructions, 06/2010, A5E00393069-03
Advertisement
Table of Contents
