Table of Contents
Advertisement
Before using the oven for the first time
In this section, you can find out what you must do before using
your oven to prepare food for the first time. First read the
section on Safety information.
Setting the time
Once the oven has been connected, the
zeros are shown flashing on the display panel. Set the time.
Press the
button.
0
1.
The display shows the time
Set the time with the buttons
2.
The programmed time is displayed after a few seconds.
Programming the oven
There are different ways to programme the oven. Programming
the type of heating, temperature or grill power. The oven can be
programmed with the cooking time (duration) and the end time
for each dish. For more information, see the chapter Setting the
time functions.
Types of heating and temperature
Example in the picture: 3D hot air heating, 190 ºC.
Use the function selector to select the required type of
1.
heating.
Use the temperature selector to set the temperature or the
2.
grill setting.
The oven heats up.
Switch off the oven
Turn the function selector to the off position.
Changing the settings
You can change the type of heating, temperature and grill
setting as required.
8
symbol and four
0
‚ƒ
:
‹‹
.
or
.
@
A
Heating up the oven
To remove the new cooker smell, heat up the oven when it is
empty and closed. An hour of Top/bottom heating
240 °C is ideal for this purpose. Ensure that no packaging
remnants have been left in the cooking compartment.
Keep the kitchen ventilated the whole time the oven is on.
Use the function selector to set Top/bottom heating
1.
Set the temperature selector to 240 °C.
2.
After an hour, switch off the oven. To do so, turn the function
selector to the off position.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
Rapid heating
With rapid heating, the oven reaches the temperature selected
more quickly.
Only use rapid heating when temperatures above 100 °C are
selected.
Only place the food in the oven after rapid heating has finished,
so as to ensure even cooking.
Move the function selector to the
1.
Use the temperature selector to set the temperature.
2.
The oven starts after a few seconds. The indicator lamp above
the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
%
at
%
.
position.
J
Advertisement
Table of Contents
