Table of Contents
Advertisement
Door lock
Before using the oven for the first time
In this section, you can find out what you must do before using
your oven to prepare food for the first time. First read the
section on Safety information.
Heating up the oven
To remove the new cooker smell, heat up the oven when it is
empty and closed. An hour of Top/bottom heating
240 °C is ideal for this purpose. Ensure that no packaging
remnants have been left in the cooking compartment.
Setting the oven
There are various ways in which you can set your oven. Here
we will explain how you can select the desired type of heating
and temperature or grill setting.
Type of heating and temperature
Example in the picture:
%
The function selector is used to set the type of heating.
1.
Set the temperature or grill setting using the temperature
2.
selector.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
8
Product no. 612594
%
Top/bottom heating at 190 °C.
To prevent children from opening the oven door. The locks on
different types of appliance door are screwed in differently.
See the information sheet supplied with the door lock.
Keep the kitchen ventilated the whole time the oven is on.
Use the function selector to set Top/bottom heating
1.
Set the temperature selector to 240 °C.
2.
After an hour, switch off the oven. To do so, turn the function
selector to the off position.
at
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
The oven begins to heat up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Cleaning agents
To ensure that the different surfaces are not damaged by using
the wrong type of cleaning agent, observe the information in the
table. Do not use
harsh or abrasive cleaning agents,
■
cleaning agents with a high concentration of alcohol,
■
hard scouring pads or sponges,
■
high-pressure cleaners or steam cleaners.
■
Wash new sponge cloths thoroughly before use.
Area
Control panel
Cleaning agents
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaners or glass
scrapers.
.
%
Advertisement
Table of Contents
