Ams Automatic Frequency Scan; Switch The Frequency Bands; Reg Signal Sensitivity; Rds Functions - Xomax XM-RSU221BT User Manual

Topic: Radio mode

AMS Automatic frequency scan

Press the button to start the
AMS
automatic frequency scan.
The unit searches automatically for the
radio stations with the strongest signal
and stores them in the memory cells
1-6 per frequency band.

Switch the frequency bands

Press the button on the front
BND
panel or on the remote control to switch
the frequency bands between FM1, FM2
und FM3, AM1 and AM2.
FM1
FM3

REG Signal sensitivity

If the function is on the radio searches
only for the local stations with the
strong enough signal. Otherwise appear
all the found stations even with the
poor signal.
To (de-)activate the function press
several times the
Rotary button
button on the remote till the prompt
" appears. Now rotate the button
REG"
or use the /
VOL-
the remote to switch between on/off.
XOMAX
FM2
or
SEL
buttons on
VOL+

RDS functions

Please note: the provided RDS functions
(AF, TA and PTY) in some countries may
be unavailable.
PTY function
The Programme Type function allows
to search for a station according to it's
type (e.g. music or education).
Use the button on the remote to
PTY
achieve it.
TA function
(Traffic Announcement)
While this function is activated the unit
switches automatically to the radio
mode for the current traffic announ-
cement. After the announcement it
switches back to the initial mode.
To (de-)activate the function press
several times the
button on the remote till the prompt
" appears. Now rotate the button or
TA"
use the /
VOL-
remote to switch between on/off.

TA volume

Allows you to define the loudness of the
annoucements.
Press several times the
or button on the remote till the
SEL
prompt "
TA VOL"
the button or use the
buttons on the remote to set the
volume of the announcements.
22
(Programme Type)
or
Rotary button
buttons on the
VOL+
Rotary button
appears. Now rotate
/
VOL- VOL+
X M - R S U 2 2 1 B T
DE
SEL