Table of Contents
Advertisement
Finalise
[DVD-R] [DVD-RW] [+R] (You can play the disc on
compatible DVD players by finalising it on the
unit.)
[BD-R] (Finalising BD-R prevents accidental
recording or editing.)
1 Select "Yes", then press [OK].
2 Select "Start", then press [OK].
3 Press [OK].
After finalising
• [BD-R] [DVD-R] [+R] The disc becomes play-only
and you can no longer record or edit.
• [DVD-RW] You can record and edit the disc after
formatting.
• You cannot cancel finalising.
• Finalising takes up to 15 minutes (Up to 60 minutes in case
of DVD-R DL and +R DL).
• Do not disconnect the AC mains lead while finalising.
This can render the disc unusable.
• Depending on the disc, it may take longer than displayed on
the confirmation screen (approximately four times longer).
• You cannot finalise discs recorded on other manufacturer's
equipment.
• [DVD-R] [DVD-RW] [+R] If you finalise discs recorded on
Panasonic equipment other than this unit, the background
selected as "Top Menu" may not be displayed.
• Discs finalised on this unit may not be playable on other
players due to the condition of the recording.
Create Top Menu
[+RW]
You can create Top Menu for displaying on other
equipment.
Make selections from "Top Menu" and "Auto-Play
Select" before creating Top Menu.
1 Select "Yes", then press [OK].
2 Select "Start", then press [OK].
3 Press [OK].
• You cannot use the Top Menu for playing on this unit.
• The created menu is deleted when you record or edit the
disc.
Entering text
Preparation
• Show the "Enter Title Name" screen, etc.
1
Select a character, then press [OK].
Repeat this step to enter other characters.
e.g.,
Name field:
Enter Title Name
1
2
3
4
5
Shift
q
w
e
r
t
a
s
d
f
g
z
x
c
v
b
/
:
~
_
Symbols
Alphanumeric
OK
RETURN
• To enter Alphanumeric characters:
Press the green button, then select
characters.
• To enter Symbols:
Press the red button, then select
characters.
• To enter Other Characters, such as umlaut
mark or accent grave:
Press the yellow button, then select
characters.
• To delete a character:
Select the character in the name field, then
press [PAUSE ;].
• To shift the alphabetic characters on the
screen to upper case/lower case:
Press [PLAY/a1.3 1].
2
Press [STOP ∫] (Finish).
"Writing..." appears then the screen returns
to the previous screen and so on.
To end partway
Press [RETURN
]. (Text is not added.)
• The maximum number of characters depends on the
media.
• If a name is long, parts of it may not be shown in some
screens.
Convenient functions
shows the text you have
entered
6
7
8
9
0
Delete
y
u
i
o
p
Finish
h
j
k
l
.
n
m
@
*
#
-
,
;
'
"
Other Characters
SQT0351
99
- Quick Links:
- Operating Instructions
Hide quick links:
Advertisement
Table of Contents
